Nederman FlexFilter 13 and 18 cartrige dust collector

Description:

The filters are made in galvanised steel sheet and is bolted together, which makes it a very competitive alternative to other high vacuum filters.

The FlexFilter 13 and 18 can be used in applications where there is a high content of dry dust particles.

The filter can be supplied with either cartridges (UniClean) or cassettes depending on the air flow, the dust type and the dust concentration. The MHFV filter can be delivered in two different heights – type 1300 and 1800.

The cartridges/cassettes are cleaned automatically by a high-efficiency, low energy consuming compressed air system activated by an integral electronic controller.

The filters are made in galvanised steel sheet and is bolted together, which makes it a very competitive alternative to other high vacuum filters. The FlexFilter 13 and 18 can be used in applications where there is a high content of dry dust particles. The filter can be supplied with either cartridges (UniClean) or cassettes depending on the air flow, the dust type and the dust concentration. The MHFV filter can be delivered in two different heights – type 1300 and 1800. The cartridges/cassettes are cleaned automatically by a high-efficiency, low energy consuming compressed air system activated by an integral electronic controller.
Quick release waste bin
Front service of the cleaning valves, the controller, the compressed air tank and the filter elements
Available with cartridges or cassettes

Specifications:
Application Dust, Granulate, Grit, Fumes
Certifications CE
Compressed air requirement 6 bar
Dustbin volume (gal) 50 or 100, or whitout
Filter cleaning method Pulse jet
Installation Indoor, Outdoor
Material Housing in galvanised steel sheet (3 mm)
Operating Temperature -4 to 167 F (-20 to 75 C)
Working pressure (psi) Max. 30.000 (4,35 psi)