Serial # 160040607
If you are looking to get started making QUALITY thermofoil components as economically as possible, the ESTREMA S is the answer for you. The standard machine features POSITIVE TOP PRESSURE and our state-of-the-art “membrane-less” technology. Working without a membrane makes financial sense. It saves thousands of dollars per year in replacing silicon membranes. The ESTREMA S reliably laminates films as thin as 10-mil (250 micron) thickness with beautiful results.
The ESTREMA S consistently produces high quality components at twice the speed of a simple vacuum press and unlike a vacuum press, you can forget about the frustrations of using a heat gun or drilling holes through the melamine to get the PVC to fully conform to the inside profiles.
Overall loading tray dimensions mm 2,500 x 1,300 (98” x 51”)
Useful lamination area mm 2,300 x 1,100 (90” x 43”)
Foil width mm 1300 – 1450 (51” – 57”)
Max. work piece thickness + pedestal height mm 55 (2-1/8”)
Max. positive forming pressure bar 3.5+1 (42 + 14 psi)
Max working temperature 130C 266F
Number of hydraulic pressing cylinders 6
Cost saving membrane-less 3-D thermoforming of PVC foils
Manual movement of the shuttle tray in and out of the press
Automatic opening and closing of the press
Vacuum pump with high capacity accumulation tank
Adjustable pressure controls for setting preheating and forming pressures
Safety screen enclosure with access doors instead of pictured cabin
PLC software operator interface for setting, storing and monitoring cycle time parameters
Heating system comprised of electrical resistances inside of top platen
230 volt, 3 phase, 60 Hz.
NOTE: There may be some variances in the above features.